TM 9-2330-227-14&P
CONNECTOR RECEPTACLE REPAIR, 110-VOLT
This task covers:
Removal (page 5-8)
INITIAL SETUP
Personnel Required
Tools
One
Screwdriver, flat-tip, 3/16-inch
Equipment Condition
Connector receptacle removed (page 4-76).
ACTION
REMARKS
ITEM
LOCATION
REPAIR
Using 3/16-inch flat-tip screwdriver,
Two screws (2)
1. Connector
unscrew and take out.
receptacle (1)
Take out, and separate.
Gasket (3) and
2.
insulator (4)
Put in.
Gasket (3)
3.
and insulator (4)
Screw in, and tighten using 3/16-inch
Two screws (2)
4.
flat-tip screwdriver.
5-8
