TM 9-2330-227-14&P
WIRE HARNESS, 110-VOLT, BRANCH CIRCUIT BREAKERS-TO-LAMPS AND SWITCHES - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
a. Put in position.
12 clamps (8)
11. Harness (3) at
b. Put on harness (3).
right side of
ceiling
12 screws (9)
Screw together, and tighten using
12. 12 clamps (8)
7/16-inch open-end wrench and
and nuts (10)
3/16-inch flat-tip screwdriver.
Push through.
Harness (3)
13. Grommet (11)
branch to switch
at side switch
location (12)
a. Pull loose end of harness behind and
Harness (3)
14. Corner
around corner assembly, taking up all
assembly (1)
slack.
b. Let loose end hang toward circuit
breaker box.
5-5