TM 9-2330-227-14&P
LANDING GEAR AND BRACKET - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY - CONTINUED
Using 1/2-inch brass drift, tap through.
Shaft (20)
21. Washer (22) and
bevel gear (23)
Washer (22) and
Take out.
22. Gear shaft (20)
bevel gear (23)
Key (24)
Using 1/2-inch brass drift and ball-peen
23.
hammer, take out.
Gear shaft (20)
Pull out.
Rigid gearset (25)
Slide off.
25.
Two pins (21)
Lift out.
26.
Four bushings (26)
Using 1/2-inch brass drift and ball-peen
27.
hammer, drive out.
5-55
