TM 9-2330-227-14&P
U-BOLTS, RADIUS ROD AND BRACKET, AND SPRING - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
b. Using hydraulic jack, lower until some
28. Continued
weight is placed on springs (2).
Using ball-peen hammer, tap though
Two U-bolts (16)
29. Axle (1) and radius
mounting holes.
rod bracket (3)
Screw on, and tighten using 1 7/16-inch
Four nuts (17) and
30. Two U-bolts (16)
socket, 6-inch extension, and ratchet
washers (18)
handle with 3/4-inch drive.
Push through.
Two screws (19)
31. Spring brackets (6)
Screw on, and tighten using 15/16-inch
Two nuts (20)
32. Two screws (19)
socket, ratchet handle with 1/2-inch
drive, and 15/16-inch open-end wrench.
Put through nuts, and using straight-nose
Two cotter
33. Two nuts (20)
slip-joint pliers, bend legs.
pins (21)
a. Using hydraulic jack, lower.
Semitrailer
34.
b. Remove hydraulic jack and wood blocks.
frame (15)
5-67
