TM 9-2330-247-14&P
4-33.
BACKING PLATE (Con't)
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
Spindle (14)
Backing plate (1)
5.
Put in place so matchmarks line up.
Backing plate
Four shorter
6.
in. socket, ratchet
Screw in and tighten using
(1) and
screws (19),
handle with in. drive, and
in. box-end wrench.
spindle (14)
Iockwashers
(9), and nuts (8)
Four screws (20),
7.
Upper support
in. socket, ratchet
Screw in and tighten using
(21), backing
Iockwashers (6),
handle with in. drive, and
in. box-end wrench.
plate (1), and
and nuts (7)
Torque to 30-35 Ib.-ft. (41-47 NZm) using torque
spindle (14)
wrench.
Two outside
8.
Two screws (16),
Screw in and tighten using
in. socket, ratchet
holes, lower
Iockwashers (13),
handle with in. drive, and
in. box-end wrench,
support (15),
Torque to 30-35 Ib.-ft. (41-47 Nm) using torque
and nuts (12)
backing plate (1),
wrench.
and spindle (14)
Lower support
9.
Cable ramp (18)
Put in place.
(15)
10.
Cable ramp (18),
Two screws (17),
Screw in and tighten using
in. socket, ratchet
Iockwashers (11),
handle with in. drive, and
in. box-end wrench.
lower support
(15), backing
and nuts (10)
plate (1), and
spindle (14)
11.
a. Place handbrake cable (22) through hole in
Backing plate (1)
Bracket (3), two
Iockwashers (4),
backing plate (1).
and nuts (5)
b. Place bracket (3) in position.
c. Screw in and tighten nuts (5) and Iockwashers (4)
in. socket and ratchet handle with in.
using
drive.
FOLLOW-ON MAINTENANCE:
Install wheel cylinders (para 4-36).
TASK ENDS HERE
4-65
