TM 9-2330-247-14&P
4-34.
ACTION
REMARKS
ITEM
LOCATION
NOTE
While bleeding brakes, keep checking master cylinder to
ensure that it has fluid in it.
c. Have assistant pump brake pedal six times, then
in. box-end wrench,
hold pedal down. Using
open bleeder screw (2). When fluid stops, close
bleeder screw. Repeat until bubbles stop.
d. Repeat steps 1 and 2a, b, and c for other three
wheel cylinders.
FOLLOW-ON MAINTENANCE:
TASK ENDS HERE
MASTER CYLINDER
This Task Covers:
b. Installation
a.
Removal
Initial Setup:
Materials/Parts:
Equipment Conditions:
Tools/Test Equipment:
Caps, vise, jaw
Extension, socket wrench, in. drive
Pan, drain
Screwdriver, flat-tip, in.
Socket, in. drive,
in.
Socket, in. drive, in.
Vise, machinist's
Wrench, open-end, 1 in.
Wrench, open-end box,
in.
Wrench, open-end box, in.