TM 9-2330-285-14&P/TO 36A11-21-10-1
Page
Page
4-38
Light Assemblies . . . . . . . . . . . . . . . . . . . . .
4-30
Blackout Stoplight . . . . . . . . . . . . . . . . . . . .
Rear Harness and Receptacle
4-28
Blackout Stoplight Replacement . . . . . . . . .
(Early Models) . . . . . . . . . . . . . . . . . . . . . . . 4-54
Commercial Stoplight . . . . . . . . . . . . . . . . . .
4-36
Rear Harness and Receptacle
Component Testing . . . . . . . . . . . . . . . . . . . .
4-58
(Late Models) . . . . . . . . . . . . . . . . . . . . . . . . 4-56
Composite Light . . . . . . . . . . . . . . . . . . . . . . 4-24
Taillight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
Composite Light Assembly . . . . . . . . . . . . . 4-26
Front Harness and Junction Box . . . . . . . . . 4-40
Wiring Harness Repair . . . . . . . . . . . . . . . . . 4-62
Junction Box and Intervehicular
Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-49
COMPOSITE LIGHT
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Lamps (as required)
Flat-tip screwdriver
Preformed packing (if required)
Sandpaper, 00
ACTION
REMARKS
ITEM
LOCATION
LAMP AND LENS REMOVAL
Unscrew and take off using flat-tip
1 Composite light
Six screws (1) and
screwdriver.
door and lens (2)
Screws (1) are captive in door and
lens (2).
Inspect for damage.
2 Door and lens (2)
Preformed
If damaged, take it out of groove and
packing (3)
throw away.
NOTE
Only remove lamps that do not work.
Four lamps (4)
a. Push in and turn counterclockwise.
3 Composite light
b. Take out lamp.