TM 9-2330-285-14&P/TO 36A11-21-10-1
COMPOSITE LIGHT ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Omit step 5 if clip (4) was not previously removed.
5 Bracket (1)
Put on using a cross-tip screwdriver and a
Clip (4), two
7/16-inch wrench.
screws (9), two
washers (10) and
two nuts (11)
6 Composite light (6)
Put on using 7/16-inch wrench.
Two screws (7),
two washers (8)
and bracket (1)
7 Clip (4)
Four
a. Match identification tags and snap
together.
connectors (5)
b. Snap into clip (4).
8 Bracket (1)
Put on using a 7/16-inch wrench.
Two screws (2) and
two washers (3)
TASK ENDS HERE
TA 221663
