TM 9-2330-285-14&P/TO 36A11-21-10-1
COMPOSITE LIGHT ASSEMBLY
This task covers:
INITIAL SETUP
Tools
Cross-tip screwdriver
7/16-inch open end wrench
ACTION
REMARKS
LOCATION
ITEM
REMOVAL
1 Bracket (1)
Two screws (2) and
Take out using a 7/16-inch wrench.
two washers (3)
NOTE
Make sure that the identification tags are not missing from
the wiring and that they are readable before taking
electrical connectors apart. Tag if necessary.
2 Bracket (1)
Four connectors (5)
a. Pull from clip (4).
b. Separate halves of connectors (5).
3 Composite light (6)
Two screws (7),
Take off using a 7/16-inch wrench.
two washers (8)
and bracket (1)
NOTE
Do step 4 only if clip (4) is damaged.
4 Bracket (1)
Clip (4), two
Take off using a cross-tip screwdriver and a
screws (9), two
7/16-inch wrench.
washers (10) and
two nuts (11)