TM 9-2330-285-14&P/TO 36A11-21-10-1
WIRING HARNESS REPAIR
This task covers:
INITIAL SETUP
Tools
Materials/Parts
Crimping tool
Terminals (as required)
Cutting pliers
Shells (as required)
Engraving tool
New marker band
Flat-tip screwdriver
Hand wire strippers
Slip joint pliers
ACTION
REMARKS
ITEM
LOCATION
MALE CONNECTOR REPAIR
Separate.
1 Wire leads (1)
Connector
assembly (2)
Slide back on wire lead (1).
2 Male half of
Shell (3)
connector
Take off.
Washer (5)
3 Wire lead (1)
4
Slide off over contact (4).
Shell (3)
Throw away shell (3).
Cut off using cutting pliers.
Contact (4)
5
Throw away contact (4).
Strip off insulation equal to the depth of
Wire lead (1)
6
the new contact (4).
Slide onto wire lead (1).
Shell (3)
7 Wire lead (1)
Slide onto wire lead (1) and crimp using
Contact (4)
8
crimping tool.