TM 9-2330-285-14&P/TO 36A11-21-10-1
WIRING HARNESS REPAIR - CONTINUED
ACTION
REMARKS
LOCATION
ITEM
RECEPTACLE REPAIR
22 Connector (1)
Nut (2)
Take off using pliers.
Take out.
23
Grommet (3)
24 Grommet (3)
Pins (4)
Pull out of grommet.
Remove by melting solder with soldering iron.
25 pins (4)
Wire leads (5)
NOTE
Only unsolder the leads that need to be repaired.
26 pins (4)
Wire leads (5)
a. Heat the solder well in pin (4).
b. While solder is hot, insert wire lead (5)
into it.
27 Grommet (3)
Pin (4)
Insert pin (4) into the grommet (3).
Follow chart to put pins in the
proper location.
Put grommet (3) into connector (1).
28 Connector (1)
Grommet (3)
Nut (4)
Screw on using pliers.
29
TASK ENDS HERE
TA 221689
