TM 9-2330-285-14&P/TO 36A11-21-10-1
WIRING HARNESS REPAIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
RING TERMINAL REPLACEMENT
16 Wire lead (1)
Terminal (2)
Cut off using cutting pliers.
Throw away terminal (2).
17
Wire (3)
Strip off insulation equal to the depth of
the new terminal (2).
18 Wire lead (1)
Terminal (2)
a. Slide onto the end of wire (3),
b. Crimp using crimping tool.
CIRCUIT BAND MARKER REPLACEMENT
19 Wire lead (4)
Marker band (5)
Open tabs and remove using a flat-tip
screwdriver.
Note number on the band and throw the
band away.
20
New marker
Engrave the number using the engraving tool.
band (5)
21
New marker
Put on wire lead (4) and bend tabs over using
band (5)
crimping tool.
TA 221688