TM 9-2330-285-14&P/TO 36A11-21-10-1
FRONT AND REAR AXLE ARMS
This task covers:
a. Removal (page 4-78)
b. Installation (page 4-79)
INITIAL SETUP
Materials/Parts
Tools
New cotter pins (if required)
1-inch wrench
Hammer, hand
Equipment Condition
Punch, pin
Socket, 1-inch by 3/4-inch drive
Handbrake applied.
Extension, 16 inches by 3/4-inch
Wheels chocked.
drive
Flat-tip screwdriver
Diagonal cutting pliers
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
CAUTION
Make sure that the wheels are securely chocked from both the
front and rear. If the dolly set moves with an axle arm
removed it will destroy one or more of the air mounts.
1 Pin (1)
Two roll pins
Remove roll pin (2) using a hammer and
(2) and two
punch. Take off washers (3).
washers (3)
Setscrew (5)
Remove using a flat-tip screwdriver.
2 Axle arm (4)
to pin (1)
Pin (1)
Tap out with a hammer and punch.
3 Axle arm (4) to
rocker arm (6)
