TM 9-2330-285-14&P/TO 36A11-21-10-1
FRONT AND REAR AXLE ARMS - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
Remove using a 1-inch wrench and a l-inch
Screw (8), nut (9),
4 Axle arm (4) to
socket wrench. Remove axle arm (4).
axle beam (7)
washer (10), washer
(11), three insula-
tors (12), four
washers (13) and
rubber washer (14)
INSTALLATION
a. Assemble parts to axle arm (4) in the
Screw (8), nut (9),
5 Axle beam (7)
order shown.
washer (10), washer
b. Secure axle arm (4) to axle beam (7) using
(11), three insula-
a 1-inch wrench and a 1-inch socket wrench.
tors (12), four
washers (13) and
rubber washer (14)
Tap into place using a hammer.
Pin (1)
6 Axle arm (4) to
rocker arm (6)
Install using a flat-tip screwdriver.
Setscrew (5)
7 Axle arm (4)
to pin (1)
a. Install washers (3).
Roll pin (2)
8 pin (1)
b. Install roll pin (2) using a hammer
and punch.
TASK ENDS HERE
TA 221699
