TM 9-2330-285-14&P/TO 36A11-21-10-1
TIE ROD ASSEMBLY
This task covers:
a. Removal (page 4-74)
b. Installation (page 4-74)
INITIAL SETUP
Materials/Parts
Tools
Cotter pin (two required)
Hammer, hand, 2 pounds
Diagonal cutting pliers
Tie rod separator
3/4-inch box wrench
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Removal and installation procedures are given for one tie
rod.
1 Steering knuckle
Cotter pin (1)
a. Using pliers, pull out cotter pin (1).
b. Using 3/4-inch box wrench, unscrew nut (2)
and nut (2)
and take off.
Get rid of cotter pin.
Using a tie rod separator and hammer, take
Tie rod socket (3)
2
off tie rod socket (3).
Tie rod socket (4)
a. Repeat steps 1 and 2 for tie rod
3 Steering arm
socket (4).
b. Take off tie rod assembly (5).
INSTALLATION
Place tie rod assembly (5) in position at
Tie rod
4 Steering knuckle
and steering arm
assembly (5)
steering knuckle (6) and steering arm (7).
