TM 9-2330-285-14&P/TO 36A11-21-10-1
SERVICE BRAKE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ADJUSTMENT
18 Axle (1)
Install (page 4-132).
Hub and drum
Pry out using a flat-tip screwdriver.
Adjusting hole
19 Backing pIate (2)
cover (3)
NOTE
Do step 20 if the brakes need to be tightened. Do step 21 if
the brakes need to be loosened.
20
Brake adjusting
a. Insert tool (4) to engage adjusting
wheel (5).
tool (4)
b. Pull down on tool (4) to rotate wheel (5)
in the desired direction.
Tighten the brake until a slight
drag is felt when rotating the wheel.
Brake adjusting
a. Insert screwdriver (6) to engage
21
tool (4) and
adjusting lever (7). Use screwdriver (6)
flat-tip screw-
to push the lever (7) clear of adjusting
wheel (5).
driver (6)
b. Insert adjusting tool (4) to engage
adjusting wheel (5).
c. Pull up on tool (4) to rotate wheel (5)
in the desired direction.
Loosen the brake until the wheel
rotates with a slight drag.
