TM9-2330-287-14&P
WIRE HARNESS REPAIR - CONTINUED
INITIAL SETUP
Materials/Parts
Tools
Contacts (as required)
Pliers, cutting
Marker band
Pliers, slip-joint
Shells (as required)
Screwdriver, flat-tip
Stripper, hand wire
Terminals (as required)
Tool, crimping
Tool, engraving
ACTION
REMARKS
ITEM
LOCATION
MALE CONNECTOR REPAIR
Slide back on wire lead (1).
Shell (2)
1. Wire lead (1)
Take off.
Washer (3)
2.
Slide off over contact (4).
Shell (2)
3.
Throw away shell (2).
Using cutting pliers, cut off.
Contact (4)
4.
Throw away contact (4).
Using stripper, strip off insulation equal
Wire lead (1)
5.
to the depth of the new contact (4).
Slide onto wire lead (1).
New shell (2)
6. Wire lead (1)
Slide onto wire lead (1) and, using crimp-
New contact (4)
7.
ing tool, crimp.
a. Slide onto wire lead (1).
Washer (3)
8.
b. Slide new shell (2) over washer (3) and
new contact (4).
FEMALE CONNECTOR REPAIR
Slide back on wire lead (5).
Shell (6) and
9. Wire lead (5)
sleeve (7)