TM 9-2330-287-14&P
WIRE HARNESS REPAIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
24. Pins (4)
Wire leads (5)
a. Heat the solder well in pin (4).
b. While solder is hot, insert wire lead
(5) into it.
25. Grommet (3)
Pin (4)
Insert pin (4) into the grommet (3).
Follow chart to put pins in the
proper location.
26. Connector (1)
Grommet (3)
Put grommet (3) into connector (1).
27.
Nut (2)
Using slip-joint pliers, screw on.
TASK ENDS HERE
INTERVEHICULAR CABLE RECEPTACLE
This task covers:
TA224779