TM 9-2330-287-14&P
LUNETTE - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Using socket and handle, remove.
Four capscrews
1. Cover plate (1)
(2) and four
Iockwashers (3)
Remove.
Cover plate (1)
2. Reach tube(4)
Using pliers, remove.
Cotter pin (6)
3. Nut(5)
Using wrench, remove.
Nut (5) and
4. Lunette (7)
flat washer (8)
Remove.
Lunette (7)
5. Reach tube (4)
INSTALLATION
Using wrench, install and aline cotter
Flat washer (8) and
6. Lunette (7)
pinhole.
nut (5)
Using pliers, install cotter pin (6) and
Cotter pin (6)
7. Nut (5)
bend ends over.
Position, alining mounting holes.
Cover pIate (1)
6. Reach tube (4)
Using socket and handle, install.
Four capscrews (2)
g. Cover plate (1)
and four
Iockwashers (3)
TASK ENDS HERE