TM 9-2330-297-14&P
RIMS AND TIRES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
6.
Wheel spider
Two rim and tire
Place on spider (9) with tire valves 180
assemblies (7) and
degrees opposed.
spacer band (8)
INSTALLATION
7.
Wheel assembly
Five rim clamps (6)
Place on spider (9) studs and tighten using
and stud nuts (2)
1 1/4-inch socket wrench.
8.
Hydraulic jack (3)
a. Using jack (3), raise axle beam (5) off
and jack stand (4)
jack stand (4).
b. Remove jack stand (4).
c. Remove jack (3) after lowering axle
beam (5).
9.
Wheel assembly
Stud nuts (2)
a. Using 1 1/4-inch socket and torque
wrench, torque five stud nuts (2) to
450 - 500 ft lb (610 - 678 Nm).
b. Remove wheel chocks (1).
TASK ENDS HERE
TA223190
4-79