TM 9-2330-297-14&P
SPIDER, BRAKEDRUM, AND WHEEL BEARINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
3.
Adjusting nut
a. Using 3 718-inch socket, remove
(7) and outer
nut (7).
bearing cone (8)
b. Remove outer bearing cone (8).
4.
Wheel hub (9) and
Using an assistant, remove hub (9) and drum
brakedrum (10)
(10) from axle (11).
DISASSEMBLY
5.
Wheel hub
Grease seal (12)
a. Using puller kit, remove seal (12).
and inner bearing
Discard seal (12).
cone (13)
b. Remove bearing cone (13).
6.
Inner and outer
Using hammer and punch, remove bearing
bearing cups
cups (14) and (15).
(14) and (15)
7.
Wheel hub (9) and
Using 1 1/8-inch socket and 1 1/8-inch
brakedrum (10)
wrench, remove nuts (16), washers (17),
and capscrews (18).
Hub (9) and drum (10) will separate.
4-81