TM 9-2330-297-14&P
LANDING GEAR LEG - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
NOTE
This is a typical procedure for the left or the right side landing legs.
3.
Landing gear
Screws (1) and
Using screwdriver, remove two screws (1),
leg cover (2)
cover (2), and plug (3).
4.
Pinion gear
Groove pin (4)
Using hammer and punch, remove groove
pin (4).
5.
Landing gear
Nut (5), spacer
a. Using 15/16-inch socket and 15/16inch
leg
(6), bolt (7)
wrench, remove nut (5), spacer (6),
and support (8)
and bolt (7).
b. Allow support (8) to swing clear of leg.
6.
Nut (9), bolt
a. Using 15116-inch socket and 15/16-inch
(10) and lateral
wrench, remove nut (9) and bolt (10).
support (11)
b. Allow support (11) to swing clear of leg.
7.
Chassis frame
Landing gear
a. Using 3/4-inch socket and 3/4-inch
leg (12)
wrench, remove nuts (13), washers
(14), capscrews (15), and mounting
bracket (16).
b. Slide landing gear leg (12) and pinion
gear (18) off cross-shaft (17).
8.
Support (8) and
a. Pull pin (19) out.
pin (19)
b. Remove support (8)
9.
Lateral support (11),
a. Using 15/16-inch socket and box-end
bolt (20) and
wrenches, remove nut (21) and
nut (21)
bolt (20).
b. Remove lateral support (11).
4-86
