TM 9-2330-297-14&P
Section II. MAINTENANCE PROCEDURES
Page
Page
Axle
.................................................
General ........................................ ....................
Bogie Assembly ....................................
Kingpin .............................................................
Brakedrum ............................................
Spring Leaf .......................................................
Brakeshoes...................................................
5-6
Torque Arm Bushings ........................................
Chassis Frame ......................................
Twist Lock ........................................................
GENERAL
This section provides instructions for direct support and general support maintenance of the 12-ton semitrailer (MILVAN)
coupleable chassis. The following initial setup information applies to all procedures.
Resources required are not listed unless they apply to the procedure.
Personnel are listed only if the task requires more than one technician.
If Personnel Required is not listed, one
technician can do the task.
The normal standard equipment condition to start a maintenance task is power off. Equipment condition is not listed
unless some other condition is required.
BOGIE ASSEMBLY
Repair of the bogie assembly at direct support and general support maintenance is limited to welding of minor cracks.
Refer to TM 9237, Welding, Theory and Application, Operator's Manual.
5-2
