TM 9-2330-297-14&P
AXLE BEAM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
6.
U-bolts (9), bottom
a. Place four U-bolts (9) over top
plates (13), washers
plates (10).
(14) and nuts (15)
b. Position two bottom plates (13) and
install eight washers (14) and eight
nuts (15).
c.
Using 1 5/16-inch socket, tighten
nuts (15).
d.
Using torque wrench, torque nuts (15)
to 200 - 225 ft lb (271.2 - 305.1 N.m).
7.
Torque arms (16),
a. Position torque arms (16) and insert two
bolts (17), washers
bolts (17).
(18) and nuts (19)
b. Install two washers (18) and two
nuts (19).
c.
Using 1 1/2-inch socket and 1 1/2-
inch box wrench, tighten nuts (19).
d.
Using torque wrench, torque nuts (19)
to 350 - 375 ft lb (476 6 - 508.5 N.m).
NOTE
FOLLOW-ON MAINTENANCE.
1.
Aline axle (page 4-44).
2.
Install brake chamber (page 4-68).
3
Install camshaft (page 4-55)
4
Install service brake (page 4-53).
5.
Install spider and drum (page 4-82).
TASK ENDS HERE
Page 5-6 has been rescinded T
TA223178
Change 1
5-5/(5-6 blank)
