TM 9-2330-297-14&P
AXLE BEAM
This task covers
a. Removal (page 5-3)
b. Installation (page 5-4)
INITIAL SETUP
Tools
Materials/Parts
Jack, hydraulic, hand
Rags, wiping (item 2, appendix E)
Jack stand (two required)
Solvent, drycleaning, type PD-680 (item 1,
Ratchet handle, socket, 314-inch
drive
Rule, folding, 6-foot
Personnel Required
Socket, 1 5/16- by 314-inch square
drive
Two
Socket, 1 112- by 3/4-inch square
drive
Equipment Condition
Wrench, torque, 3/4-inch drive
Wrench, box, 1 1/2-inch
Service brakes removed (page 4-52)
Camshafts removed (page 4-54).
Brake chambers removed (page 4-68).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Semitrailer
Axle (1)
a. Using jack (2), raise axle (1) clear of
chassis
two jack stands (3).
b.
Move jack stands to under rear
crossmember (4).
c.
Lower jack (2) so that semitrailer rests
on jack stands (3).
5-3
