TM 9-2330-356-14
(16) Disconnect and rewind the static ground wire.
(9) Release lock on hose reel (para 2-11) and
unreel hose.
(17) Store and cover fire extinguishers.
(10) Insert nozzle into vehicle fuel tank/container.
Hose Evacuation (M970 and M970A1). To purge
d.
Squeeze nozzle trigger to start flow.
or remove fuel from the dispensing system, use the
following procedure. This procedure must be done after
(11) At end of operation, release nozzle trigger
every operation using the dispensing hoses (fig. 2-29).
and remove nozzle from vehicle fuel tank/container.
(1) Review instructions in paragraph 2-8.
(12) Idle down engine to 1000-1200 rpm.
(2) Ensure that all valves are closed.
(13) Rewind the hose(s) (para 2-11). Tighten hose
(3) Remove fire extinguishers and bring to point
reel lock(s).
of operation.
(14) Close all valves.
(4) Start engine (para 2-10). When engine is
warm, adjust to idle speed (1000-1200 rpm).
(15) Stop engine (para 2-10d).
