TM 9-2330-356-14
(14) Stop engine (para 2-10d).
(6) Remove dust cover from outlet B (fig. 2-11 or
2-12), and connect fuel hose to outlet and storage facility.
(15) Drain accumulated water (para 2-13d).
(7) Put valve E in UNLOAD position (M967,
(16) Remove grounding wires.
M967A1, M969, and M969A1).
(17) Store and cover fire extinguishers.
(8) Ensure that valve E is in closed position on
M970 and M970A1.
Bulk Delivery (All Models). To pump fuel from the
b.
semitrailer to the storage facility (fig. 2-27), use the
(9) Open valves A (para 2-11f), B, F, and H.
following procedure:
(10) Adjust engine throttle for desired flow rate
(1) Review instructions in paragraph 2-8.
(11) Idle down engine at end of operation. Close
(2) Ensure that all valves are closed.
all valves, disconnect hose (s), and reinstall dust cover.
(3) Connect grounding wire to storage facility
(12) Put bulk fuel hoses in hose trough and secure
and grounding stud on top of semitrailer (fig. 2-7).
latches.
Remove fire extinguishers and bring them to the point of
operation.
(13) Stop engine (para 2-10d).
(4) Start engine (para 2-10). When engine is
(14) Drain accumulated water (para 2-13d).
warm, adjust throttle to idle speed (1000-1200 rpm).
(15) Remove grounding wire.
(5) Remove 4-inch bulk fuel hose from trough
(16) Store and cover fire extinguishers.
