unit /container. Remove fire extinguishers and bring them
Nonfiltered Dispensing (M969 and M969A1). Fuel
to the point of operation.
which does not require filtering is routed directly from the
pump to the hose reels, bypassing the filter/separator
warm, adjust throttle to idle speed (1000-1200 rpm).
(2) Ensure that all valves are closed.
If two vehicles are being serviced, make sure
they are both grounded using separate static
reset knob and turning clockwise. Open either valve P or
reels. M969 and M969A1 are equipped with
(8) Adjust engine throttle for desired flow rate
connect it to a suitable ground and to automotive
Figure 2-28. M969 and M969A1, Nonfiltered
Dispensing Flow Diagram.