Figure 4-157. Deadman Release Valve

TM 9-2330-356-14

TA099889

TA099887

Figure 4-157. Deadman Release Valve.

Figure 4-158. Meter Inlet Pressure Gage.

4-96. Static Reel (Fig. 4-159)

4-95. Meter Inlet Pressure Gage (Fig. 4-158)

Removal.

(1) Remove two capscrews, four washers, and

two self-locking nuts that secure static reel to cabinet.

(1) Disconnect the nylon tube from tube fitting.

(2) Remove static reel from cabinet.

(2) Remove two nuts that secure retaining plates

to rear of gage and remove plates. Then remove gage.

Installation.

(1) Place static reel in cabinet and position

(3) Remove tee and drain cock assembly from

mounting holes.

rear of gage.

(2) Install two capscrews, four washers, and two

Installation. Reverse instructions in step a.

self-locking nuts.