TM 9-2330-356-14
Figure 7-7. Power Train.
b.
Cylinder Block Assembly.
(1) The cylinder block houses the crankshaft,
Tabulated Data.
a.
pistons, camshaft, and oil pump.
(2) The crankshaft rotates on front center and
(1) Table 7-2 itemizes the dimensions and
rear main bearings, and has a flywheel (fig. 7-1) on one
clearances applicable to the DJCMS diesel engine
end and the power takeoff shaft on the other.
components. The dimensions and clearances shown are
for new parts.
(3) A gear, located on the crankshaft, drives the
camshaft and oil pump.
(2) Where greater tolerances are allowed, they
(4) Power is supplied to the crankshaft by the
will be shown in the applicable maintenance paragraph.
four pistons and the connecting rods.
b.
(5) A ring gear (fig 7-1), mounted on the
flywheel, is engaged by the starter motor pinion gear when
stripping threads.
