TM 9-2330-356-14
Table 7-1. Physical and Technical Characteristics, Model DJCMS Diesel Engine.
Electrical Characteristics:
Physical Dimensions:
Batteries . . . . . . . . . . . . . . . . . . 2, connected in parallel
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..26 in.
Battery voltage . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Vdc
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19.5 in.
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..34.5 in.
Miscellaneous Data:
Weight . . . . . . . . . . . . . . . . . . . . . . . . . .440 lb. (approx.)
Cooling air at 2400 ram . . . . . . . . . . . 1l135 cu. ft./min.
Fuel pump lift . . . . . . . . . . . . . . . . . . . . . . . . . .6ft./max.
Physical Characteristics:
Combustion air at 2400 rpm . . . . . . . . ..64 cu. ft./min.
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . ...4
Power Takeoff
Displacement . . . . . . . . . . . . . . . . . . . . . . ...120 cu. in.
Shaft length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4in.
Horsepower at 2400 ram . . . . . . . . . . . . . . . . . . . . . 27.5
Shaft diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.75 in.
Governor setting . . . . . . . . . . . . . . . 2400 rpm+/-100
Keyway length . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..3 in.
Ignition order of cylinders . . . . . . . . . . . . . ...1,2,4,3
Keyway width . . . . . . . . . . . . . . . . . . . . . . . . ...0.375 in.
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.250 in. dia.
Keyway depth . . . . . . . . . . . . . . . . . . . . . . . . ...0.188 in.
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..3.625 in.
Compression ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 19:1
Starting Aids:
Oil capacity, including 1/2quart
Starting motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
for filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61/2 quarts
Glow plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...4
Fuel, diesel . . . . . . . . . . . . . . . . . Fed. SpecVV-F-800
Manifold heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...2
(All values in inches unless otherwise specified.)
Manufacturer's Dimensions
Maximum Allowable
and Tolerances
Component
Wear Limit
Minimum
Maximum
CAMSHAFT
Beating journal diameter front
2.500
2.505
0.002
Bearing journal diameter rear
1.1880
1.1875
0.002
Bearing clearance limit
0.0012
0.0037
0.0057
Camshaft end play
0.007
0.039
0.045
Cam tappet hole diameter
0.7.505
0.7515
N/A
0.7475
Cam tappet diameter
0.7480
N/A
CONNECTING RODS:
Largebearingbore
2.1871
2.1876
2.1886
Small bushing bore
1.044
1.0455
1.045
Length - center to center
5.998
6.002
6.002
Bearing to crankshaft clearance
0.0010
0.0033
0.0040
CRANKSHAFT
Main bearing journal diameter
2.2430
2.2435
0.001
Crankshaft main bearing clearance
0.0049
N/A
0.0024
Connecting rod journal diameter
N/A
2.0600
2.0605
0.015**
End play, crankshaft
0.010
0.015
CYLINDER BLOCK:
3.2495
3.2505
Cylinder bore
0.005
0.005
0.0050
0.0070
Clearance in cylinder bore
0.9900
Bore, piston pin
0.9903
0.9903
Ring groove width top
0.0970
0.0980
0.005
Ring groove width 2nd & 3rd compression
0.0965
0.005
0.0975
Ring groove width 4th oil control
0.1880
0.005
0.1895
7-8