TM 9-2330-357-14&P
4-25. LOWER OUTRIGGER LIMIT SWITCH MAINTENANCE (Con't).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent's flash point Is 100 -138 (38 -59 ). If you become dizzy while using
F
F
C
C
cleaning solvent, Immediately get fresh air and medical help. If solvent contacts eyes,
Immediately wash your eyes and get medical aid.
1.
Clean all parts with a clean rag and dry cleaning solvent, and allow to dry.
2.
Inspect for loose, missing, or damaged hardware.
3.
Inspect wiring for damage, deteriorated insulation, and broken or frayed conductors.
4.
Inspect lower outrigger limit switch for cracks or signs of burning.
5.
Inspect bracket for cracks, rust, or corrosion.
c. INSTALLATION
1.
Install lower outrigger limit switch (8) into
bracket (1) with two new lockwashers (2) and
screws (3).
NOTE
Unused lead and connector of lower outrigger
limit switch must be folded and safely bound to
other leads using electrical tape.
2.
Connect two switch connectors (7) to harness
connectors.
3.
Install bracket (1) to outrigger with four
washers (4), new lockwashers (5), and screws
(6).
4-38
