TM 9-2330-357-14&P
4-26. COMPOSITE LIGHT ASSEMBLY MAINTENANCE (Con't).
b. DISASSEMBLY
1.
Loosen six captive screws (9).
2.
Remove lens (8) and preformed packing (10) from body (13). Inspect preformed packing for damage. If
damaged, remove and discard.
3.
Remove lamps (11) from sockets (12).
NOTE
To remove LEDs, perform steps 4 and 5.
If LEDs are not present, skip steps 4 and 5.
4.
Insert a small flat-tipped screwdriver into slot inside center hole in LED marker (15). Firmly push in, turn
counterclockwise slightly, and remove from socket (12).
5.
Insert a small flat-tipped screwdriver into slot on left side LED stoplight (14) and remove cover, allowing
access to slot in center hole. Firmly push in with screwdriver in center hole slot, turn counterclockwise
slightly, and remove from socket (12).
TA706457
4-42