TM 9-2330-357-14&P
4-25. LOWER OUTRIGGER LIMIT SWITCH MAINTENANCE.
This Task Covers:
a. Removal
c. Installation
b. Cleaning and Inspection
d. Adjustment
Initial Setup:
Equipment Conditions:
Materials/Parts:
Affected outrigger raised halfway (para 2-12).
Rags (Item 14, Appendix E)
Outrigger control panel power switch in to OFF
Marker tags (Item 17, Appendix E)
Dry cleaning solvent (Item 16, Appendix E)
Electrical tape (Item 18, Appendix E)
position.
Six lockwashers
Tools/Test Equipment:
General mechanic's tool kit
Common no. 1 shop set
Switch adjustment tool (Appendix G)
Personnel Required: Two
a. REMOVAL
1.
Remove four screws (6), lockwashers (5), and
washers (4), and ease bracket (1) away from
outrigger. Discard lockwashers.
2.
Tag and disconnect two switch connectors (7)
from harness connectors.
3.
Remove two screws (3), lockwashers (2), and
lower outrigger limit switch (8) from bracket
(1). Discard lockwashers.
TA706452
4-37
