TM 9-2330-357-14&P
4-27. CLEARANCE LIGHT ASSEMBLY REPLACEMENT (Con't).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent's flash point is 100 -138 (38 -59 ). If you become dizzy while using
F
F
C
C
cleaning solvent, immediately get fresh air and medical help. If solvent contacts eyes,
immediately wash your eyes and get medical aid.
1.
Clean all parts with a clean rag and dry cleaning solvent, and allow to dry.
2.
Inspect for loose, missing, or damaged hardware.
3.
Inspect mounting plate, lens retainer, and lens for cracks, holes, and other signs of damage.
c. INSTALLATION
1.
Install new gasket (10) and mounting plate (6)
nuts (9).
2.
Connect lead (7) to harness connector.
3.
Install lamp (5) in socket.
4.
Install lens (3) into lens retainer (2).
5.
Install lens retainer (2) with two screws (1).
FOLLOW-ON TASKS:
Connect tractor truck intervehicular cable to semitrailer (para 2-10).
TA706460
4-46