TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't).
a.
DISASSEMBLY
1.
Position outrigger actuator assembly (2) on
horizontal jig with lower drain plug (3) down.
Place suitable container on floor beneath lower
drain plug.
2.
Loosen upper drain plug (1).
3.
Remove lower drain plug (3) and allow
hydraulic fluid to drain into container.
4.
Remove upper drain plug (1).
5.
Position outrigger actuator assembly (2) into
vertical jig.
NOTE
Socket head screws are of different sizes. Note
locations of socket head screws for
Installation.
6.
Remove 23 socket head screws (5) from gear
housing cover (4) and gear housing (6).
5-27
