TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't).
CAUTION
DO NOT allow sealing compound to be contaminated with oil, dirt, dust,
etc. during curing process.
NOTE
Circulating warm air, not to exceed 120 (49 ), will accelerate curing time.
F
C
9.
Apply sealing compound (Item 6, Appendix E) to inside edge of extension cover (31), then tap cap plug
(36) into centerbore of extension cover until it bottoms against counterbore shoulder.
10.
Apply sealing compound (Item 6, Appendix E)
to cap plug (36) and extension cover (31).
Allow sealing compound to cure for 72 hours.
11.
Apply light film of grease to entire inside
diameter of extension cover (31) and cap plug
(36).
12.
Place extension cover (31), with cap plug (36)
up, in arbor press.
13.
Apply light film of grease to bearing diameter
on extension cover (31).
5-39
