TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't).
23.
Install gear housing (6) into vertical jig with cap
plug (36) end of extension cover (31) up.
24.
If removed, install lower gearshaft bearing (20)
into gear housing (6), tapping as necessary
until lower gearshaft bearing bottoms against
shoulder of bearing pocket.
25.
Line up keyways in output gear (19) with
keyways in extension cover (31) and install
output gear face up onto extension cover,
tapping as necessary until output gear bottoms
against lower gearshaft bearing (20).
26.
Install key (21) into keyway and tap into
position.
27.
Install lockwasher (17) onto extension cover
(31). Ensure that tab (14) on lockwasher is
positioned in one of two keyways of output
gear (19).
28.
Install locknut (16) onto extension cover (31)
and tighten securely.
5-42
