TM 9-2330-357-14&P
5-11. OUTRIGGER ACTUATOR ASSEMBLY REPAIR (Con't)
14.
Press two bearings (35), with inner race thrust shoulders down, onto extension cover (31) using bearing
inserter (J-16116-F/A-F8) until bearings bottom against shoulder.
15.
Press remaining two bearings (35), with inner race thrust shoulders up, onto extension cover (31) with
bearing inserter (J-16116-F/A-F8) until bearings bottom against first two bearings.
16.
Place gear housing (6) into vertical jig and apply thin film of grease to bearing bore in gear housing.
17.
Install extension cover (31) with four bearings
(35) into gear housing (6) until first bearing
bottoms against gear housing shoulder.
5-40
