TM9-2330-358-14&P
WARNING
Dry cleaning solvent (PD-680) is both toxic and
flammable. Avoid prolonged breathing of vapors. Avoid
skin contact. Use only in a well ventilated area.
Keep away from open flame. Flash point of solvent is
138F (59C).
(2) Repair minor damage to machined surfaces with a fine mill file or crocus
cloth dipped in dry cleaning solvent (PD-680).
(3) Machined surface deeply nicked which could affect the assembly operation
should be replaced. See your supervisor.
(4) Minor damage to threaded capscrew holes should be repaired with thread tap
of same size. See your supervisor.
c. Metal Lines, Flexible Lines (Hoses) and Metal Fittings.
Refer to brake
system maintenance procedures.
REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
Section II.
Page
Common Tools and Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Special Tools, TMDE and Support Equipment
4-7.
COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of
Organization and Equipment (MTOE) applicable to your unit.
4-8.
SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
No special tools, TMDE or support equipment is required for maintenance of the
semitrailer .
REPAIR PARTS
4-9.
SERVICE UPON RECEIPT OF MATERIEL
Section III.
Page
Servicing the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Unpacking and Checking the Equipment
4-10.
UNPACKING AND CHECKING THE EQUIPMENT
a. Remove any metal strapping, plywood, tapes, seals, wrapping paper or any
other shipping and protective items.
4-5