TM9-2330-358-14&P
CAUTION
Make sure electrical wires are pulled down when
installing nose box cover. Failure to do so will cause
damage to the electrical system.
NOTE
Item 2 is on the M871 semitrailer only.
(4) Pull wires down from center hole in kingpin plate while installing nose box
cover (3) on nose box (4). Install ten washers (2) and screws (1) to
secure cover (3) to semitrailer.
(5) Connect electrical power and test for proper operation.
TASK ENDS HERE
4-18.
24 VOLT RECEPTACLE (NOSE BOX COVER)
This task covers:
Remova1
Disassembly
Assembly
Installation
INITIAL SETUP
Materials/Parts
Tools
Tags (item 15,
Electrical connector repair kit
General mechanics tool kit and common supplement II
a.
Removal.
WARNING
Disconnect all outside power before performing any
maintenance on the electrical system. Failure to do so
could result in injury.
NOTE
Item 2 is on the M871 semitrailer only.
(1) Remove ten screws (1, fig. 4-3) and ten washers (2).
(2) Ease the nose box cover (3) away from the nose box (4).
4-22
