TM9-2330-358-14&P
(3) Remove two screws (5) and clips (6) from the terminal boards (7).
(4) Repeat steps 1 through 3 for the remaining two resistors.
Figure 4-5. Resistor
b.
Installation.
(1) Install two clips (6, fig. 4-5) to the terminal boards (7) and secure with
two screws (5).
(2) Place resistor (4) into position.
NOTE
Item 2 is on the M871 semitrailer only.
(3) Install two screws (1), washers (2) and nuts (3).
(4) Repeat steps 1 through 3 for other resistors.
(5) Install nose box cover.
(6) Connect electrical power and test for proper operation.
TASK ENDS HERE
TERMINAL BOARDS
4-20.
This task covers:
Removal
Installation
4-26