TM 9-2330-371-14&P
COMPOSITE LIGHT ASSEMBLIES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
LAMPS, LENS, AND DOOR ASSEMBLY REPLACEMENT CONTINUED
Door and lens
8.
Preformed
Take out of groove (18) and discard.
assembly (14)
packing (17)
Four lamps (19)
9.
a. Push in, turn one-quarter turn counter-
clockwise and take out.
b. Inspect for corrosion.
If corroded, clean.
NOTE
Top lamp in light assembly is taillight, second lamp is
stop-turn lamp, third down is blackout taillight, and
bottom lamp is blackout stoplight.
Four lamps (19)
Composite light
10.
Place in proper socket (20), push in and
body (15)
turn one-quarter clockwise.
Preformed
11.
Place in groove (18).
packing (17)
Door and lens
12.
Place in position on composite light
assembly (14)
body (15).
13.
Six screws (16)
Screw in, using screwdriver.
If replacing lamp, lens, or door
assembly only, go to follow-on
maintenance (page 4-28).
TA224219
4-27
