TM 9-2330-371-14&P
COMPOSITE LIGHT ASSEMBLIES- CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION
Put in.
Grommet (2)
Bracket (1)
14.
a. Feed lead connector halves (4) into
Composite light
15.
grommet (2).
assembly (3)
b. Place in position and aline with
boltholes (5).
Screw into back of light assembly
Two bolts (6) and
Composite light
16.
and tighten using socket and handle.
Iockwashers (7)
assembly (3) and
bracket (1)
Match and fasten to four wiring harness
Four connector
17.
connector halves (8) with the same
halves (4)
numbers.
a. Push door shut.
Nut (11), screw
Door (9) and
18.
b. Put in and tighten using socket,
(12), washer (13),
bracket (10)
handle, and open-end wrench.
and Iockwasher (14)
NOTE
Test operation of
FOLLOW-ON MAINTENANCE:
lights. (page 2-17).
TASK ENDS HERE
TA224220
