TM 9-2330-371-14&P
CLEARANCE LIGHT ASSEMBLIES - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL CONTINUED
NOTE
If replacing lamp only, go to step 20.
If clearance light has wire harness mounted on back,
do steps 6 and 7.
Using wrench, unscrew and take off.
Nut (7) and
Screw (6)
6.
Iockwasher (8)
a. Take off.
Wire harness
7.
b. Spread apart and remove from wire
clip (9)
harness (10).
Take apart.
Connector
Wire harness (10)
8.
If removing both clearance lights,
halves (11)
tag wires for installation.
Using cross-tip screwdriver and wrench,
Four screws (13),
Light body (3)
9.
unscrew and take out.
nuts (14), and
and frame (12
Iockwashers (15)
Light body (3) and
Guide connector half (11) through hole and
Frame (12)
10.
gasket (16)
take out.
TA224223
4-31