TM 9-2330-371-14&P
CLEARANCE LIGHT ASSEMBLIES - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL- CONTINUED
Screw (2)
Using flat-tip screwdriver, unscrew and
Light body (1)
11.
take out.
Pull from light body.
Socket (3)
12.
INSTALLATION
Feed connector half (4) through hole (5)
Socket (3)
13.
and put in place.
Put in and tighten using flat-tip
Screw (2)
14.
screwdriver.
Light body (1) and
Feed connector half through hole and put
Frame (6)
15.
in place.
gasket (7)
Four screws (8),
Put in and tighten using cross-tip screw-
16.
nuts (9), and
driver and wrench.
Iockwashers (10)
Connector
Match numbers and push together.
Wire harness (11)
17.
halves (12)
NOTE
If wire harness clip was not mounted to back of
clearance light, go to step 20.
TA224224