TM 9-2330-371-14&P
CLEARANCE LIGHT ASSEMBLIES- CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION CONTINUED
Put in place.
Lens (2)
21.
Lens
housing (1)
Put in place and line up holes.
22.
Lens housing (1)
Light body (3)
Put in and tighten using flat-tip
23.
Two screws (4)
screwdriver.
TASK ENDS HERE
LEAD ASSEMBLY (RECEPTACLE)
This task covers:
INITIAL SETUP
Materials/Parts
Tools
Pliers, cutting
Pliers, slip-joint
Pliers, stripping
Screwdriver, flat-tip, 1/4-inch
Socket, 7/16-inch, 1/2-inch drive
Wrench, 7/16-inch