TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REMOVAL CONTINUED
Nut (16), bolt (17),
Using 9/16-inch wrench, and 9/16-inch
Right splash
18.
washer (18), and
socket and handle, unscrew, take out, and
shield (15)
Iockwasher (19)
open shield.
Repeat for left side.
19.
Four connectors (21)
a. Check wire markers for readability.
Behind left rear
If not readable, tag for assembly.
clearance
b. Pull apart halves.
lights (20)
20.
Nut (24) and
Using 3/8-inch socket and handle, un-
Harness clamp (22)
Iockwasher (25)
screw and take off.
and clearance
light bolt (23)
21.
Clearance light
Using screwdriver, spread and take off.
Clamp (22)
Repeat steps 19,20, and 21 for right
bolt (23) and
rear clearance lights (27).
wire harness (26)
4-43
