TM 9-2330-371-14&P
WIRE HARNESS - CONTINUED
ACTION
ITEM
LOCATION
REMARKS
REMOVAL CONTINUED
12.
Four connectors (2)
Behind right
a. Check wire markers for readability.
middle clearance
If not readable, tag for assembly.
lights (1)
b. Pull apart halves.
13.
Nut (5) and
Harness clamp (3)
Using 3/8-inch socket and handle, un-
Iockwasher (6)
and reflector
screw and take off.
bolt (4)
14.
Reflector bolt
Clamp (3)
Using screwdriver, spread and take off.
(4) and wire
Repeat steps 12, 13, and 14 for left
harness (7)
middle clearance lights (8).
15.
13 harness
13 nuts (11) and
Using 7/16-inch socket and handle,
clamps (9) and
Iockwashers (12)
unscrew and take off.
13 studs (10)
16.
13 studs (10) and
13 clamps (9)
Using screwdriver, spread and take off.
wire harness (7)
17.
Grommet hole
Grommet (14)
Pull out and take off.
(13) and wire
harness (7)
4-42
