TM 9-2330-371-14&P
WIRE HARNESS
This task covers:
a. Removal (page 4-39)
b. Installation (page 4-46)
INITIAL SETUP
Materials/Parts
Tools
Antichafing material
Handle, socket, 3/8-inch drive
Tape, electric, plastic
Screwdriver, flat tip, 1/4-inch tip
Tags, marker (item 17, appendix E)
Socket, 7/16-inch, 3/8-inch drive
Wire, 5 feet
Socket, 3/8-inch, 3/8-inch drive
Socket, 9/16-inch, 3/8-inch drive
Personnel Required
Tape measure
Wrench, 9/16-inch, open-end
One
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Seven connectors (4)
a. Open nose box door and check band
1.
Harness (1) to
markers for readability at assembly.
receptacle lead
If not readable, tag connector
assembly (2) in
halves.
nose box (3)
b. Pull apart halves.
Two nuts (6) and
Two harness
Using 7/16-inch socket and handle, un-
2.
Iockwashers (7)
screw and take out.
clamps (5) to
nose box (3)
Two clamps (5)
Using screwdriver, spread and take off.
3.
Semitrailer nose
box (3) and wire
harness (1)
